Manual Climate Control Descriptions - Jeep WRANGLER 2020 Owner's Manual

GETTING TO KNOW YOUR VEHICLE 49

Manual Climate Control Descriptions

Icon Description
A/C Button — If Equipped
2
Push the A/C button to engage the Air Conditioning (A/C). The A/C indicator illuminates when A/C is on.
MAX A/C Setting — If Equipped
Set the temperature control knob to the MAX A/C setting to change the current setting to the coldest output of air. Moving
the temperature control knob away from the MAX A/C setting causes the MAX A/C operation to exit.
Recirculation Button
Push the recirculation button on the faceplate to change the system between recirculation mode and outside air mode.
The Recirculation indicator and the A/C indicator (if equipped) illuminate when the Recirculation button is pressed.
Recirculation can be used when outside conditions such as smoke, odors, dust, or high humidity are present. Recirculation
can be used in all modes except for Defrost. Recirculation may be unavailable if conditions exist that could create fogging
on the inside of the windshield. The A/C can be deselected manually without disturbing the mode control selection.
Continuous use of the Recirculation mode may make the inside air stuffy and window fogging may occur. Extended use of
this mode is not recommended.
Rear Defrost Button
Push and release the Rear Defrost Control button to turn on the rear window defroster and the heated outside mirrors
(if equipped). The Rear Defrost indicator illuminates when the rear window defroster is on. The rear window defroster
automatically turns off after 15 minutes.