Fuses; General Information; Power Distribution Center (Pdc) - Jeep WRANGLER 2020 Owner's Manual

292 IN CASE OF EMERGENCY

FUSES

WARNING!
When replacing a blown fuse, always use

an appropriate replacement fuse with the
same amp rating as the original fuse. Never
replace a fuse with another fuse of higher
amp rating. Never replace a blown fuse with
metal wires or any other material. Failure to
use proper fuses may result in serious
personal injury, fire and/or property
damage.
Before replacing a fuse, make sure that the

ignition is off and that all the other services
are switched off and/or disengaged.
If the replaced fuse blows again, contact an

authorized dealer.
If a general protection fuse for safety

systems (air bag system, braking system),
power unit systems (engine system,
gearbox system) or steering system blows,
contact an authorized dealer.

General Information

The fuses protect electrical systems against
excessive current.
When a device does not work, you must check
the fuse element inside the blade fuse for a
break/melt.
Also, please be aware that when using power
outlets for extended periods of time with the
engine off may result in vehicle battery
discharge.
Blade Fuses
1 — Fuse Element
2 — Blade Fuse with a good/functional fuse
element.
3 — Blade fuse with a bad/not functional fuse
element (blown fuse).

Power Distribution Center (PDC)

The Power Distribution Center is located in the
engine compartment near the battery. This
center contains cartridge fuses, mini fuses, and
relays. The PDC top cover is labeled with each
serviceable fuse/relay location, function, and
size.
Power Distribution Center