Jeep WRANGLER 2020 Owner's Manual page 384

382 MULTIMEDIA
Safety/Assistance
After pressing the Safety/Assistance button on the touchscreen, the following settings will be available:
Setting Name
Forward Collision Warning — If
Equipped
Forward Collision Warning Sensitivity
— If Equipped
ParkView Backup Camera Delay
NOTE:
The "ParkView Backup Camera Delay" setting determines whether or not the screen displays the rear view image with dynamic grid lines for up to
10 seconds after the vehicle is shifted out of REVERSE. This delay is canceled if the vehicle's speed exceeds 8 mph (13 km/h), the transmission is
shifted into PARK, or the ignition is switched to the OFF position.
ParkView Backup Camera Active Guide
Lines
NOTE:
The "ParkView Backup Camera Active Guide Lines" setting overlays the Rear Backup Camera image with active, or dynamic, grid lines to help illustrate
the width of the vehicle and its projected backup path, based on the steering wheel position when the option is checked. A dashed center line overlay
indicates the center of the vehicle to assist with parking or aligning to a hitch/receiver.
ParkSense — If Equipped
Rear ParkSense Volume — If Equipped
Selectable Options
Off
Near
On
On
Sound Only
Low
Warning Only Warning & Braking
Med
Off
Off
Sound & Display
Medium
Far
High