To Vary The Speed Setting; To Accelerate For Passing - Jeep WRANGLER 2020 Owner's Manual

To Vary The Speed Setting

To Increase Speed
When the Speed Control is set, you can increase
speed by pushing the SET (+) button.
The driver's preferred units can be selected
through the instrument panel settings. Refer to
"Instrument Cluster Display" in "Getting To
Know Your Instrument Panel" for more
information. The speed increment shown is
dependent on the chosen speed unit of US
(mph) or Metric (km/h):
US Speed (mph)
Pushing the SET (+) button once will result in

a 1 mph increase in set speed. Each subse-
quent tap of the button results in an increase
of 1 mph.
If the button is continually pushed, the set

speed will continue to increase until the
button is released, then the new set speed
will be established.
Metric Speed (km/h)
Pushing the SET (+) button once will result in

a 1 km/h increase in set speed. Each subse-
quent tap of the button results in an increase
of 1 km/h.
If the button is continually pushed, the set

speed will continue to increase until the
button is released, then the new set speed
will be established.
To Decrease Speed
When the Speed Control is set, you can
decrease speed by pushing the SET (-) button.
The driver's preferred units can be selected
through the instrument panel settings. Refer to
"Instrument Cluster Display" in "Getting To
Know Your Instrument Panel" for more
information. The speed increment shown is
dependent on the chosen speed unit of US
(mph) or Metric (km/h):
US Speed (mph)
Pushing the SET (-) button once will result in

a 1 mph decrease in set speed. Each subse-
quent tap of the button results in a decrease
of 1 mph.
If the button is continually pushed, the set

speed will continue to decrease until the
button is released, then the new set speed
will be established.
STARTING AND OPERATING
Metric Speed (km/h)
Pushing the SET (-) button once will result in

a 1 km/h decrease in set speed. Each subse-
quent tap of the button results in a decrease
of 1 km/h.
If the button is continually pushed, the set

speed will continue to decrease until the
button is released, then the new set speed
will be established.

To Accelerate For Passing

Press the accelerator as you would normally.
When the pedal is released, the vehicle will
return to the set speed.
Using Speed Control On Hills
The transmission may downshift on hills to
maintain the vehicle set speed.
NOTE:
The Speed Control system maintains speed up
and down hills. A slight speed change on
moderate hills is normal.
241
5