Jeep WRANGLER 2020 Owner's Manual page 81

The following options are available to you when
lowering your vehicle's soft top:
Sunrider® position with rear and quarter

windows installed
Sunrider® position with rear and quarter

windows removed
Sunrider® position with rear window

installed and quarter windows removed
Fully lowered position with rear and quarter

windows removed
Both quarter windows should be removed and
installed together.
Lowering The Soft Top Into Sunrider® Position
1. Fold both sun visors forward
against the windshield.
2. Release the header latches
from the crossbar by pulling the
handle downward. Make sure the hook is
disengaged from its receiver.
Step Two
3. From both the left and right sides, lift up on
the #1 Bow of the soft top to start the
operation.
Step Three
4. Move to the side of the vehicle and use the
side link to fold the soft top rearward into
the Sunrider® position.
GETTING TO KNOW YOUR VEHICLE
Step Four
NOTE:
If leaving the soft top in the Sunrider® position,
secure the top by using the two hook-and-loop
fasteners provided in the center console.
Secured Top When In Sunrider® Position
79
2