Rear Seat Armrest - If Equipped; Head Restraints; Front Head Restraints - Jeep WRANGLER 2020 Owner's Manual

Rear Seat Armrest — If Equipped
The center part of the rear seat can also be
used as a rear armrest with cupholders. To
unfold it, grab the pull strap under the head
restraint and pull it forward.
Rear Seat Armrest
NOTE:
The cupholder liner can be removed for
cleaning.
WARNING!
Be certain that the seatback is securely
locked into position. If the seatback is not
securely locked into position the seat will not
provide the proper stability for child seats
and/or passengers. An improperly latched
seat could cause serious injury.

HEAD RESTRAINTS

Head restraints are designed to reduce the risk
of injury by restricting head movement in the
event of a rear impact. Head restraints should
be adjusted so that the top of the head restraint
is located above the top of your ear.
WARNING!
All occupants, including the driver, should

not operate a vehicle or sit in a vehicle's
seat until the head restraints are placed in
their proper positions in order to minimize
the risk of neck injury in the event of a
crash.
GETTING TO KNOW YOUR VEHICLE
WARNING! (Continued)
Head restraints should never be adjusted

while the vehicle is in motion. Driving a
vehicle with the head restraints improperly
adjusted or removed could cause serious
injury or death in the event of a collision.

Front Head Restraints

To raise the head restraint, pull upward on the
head restraint. To lower the head restraint,
push the adjustment button located on the
base of the head restraint, and push downward
on the head restraint. The release button does
not need to be pushed to adjust the head
restraint.
To remove the head restraint, raise it as far as it
can go then push the adjustment button and
the release button at the base of each post
while pulling the head restraint up. To reinstall
the head restraint, put the head restraint posts
into the holes and push downward. Then adjust
it to the appropriate height.
(Continued)
37
2