Jeep WRANGLER 2020 Owner's Manual page 82

Hide thumbs Also See for WRANGLER 2020:
Table of Contents

Advertisement

80
GETTING TO KNOW YOUR VEHICLE
NOTE:
The vehicle can be driven in the Sunrider®
position with the rear window and quarter
windows fully installed or completely
removed.
The rear window and rear quarter windows
must be removed before fully lowering the
soft top to prevent damage to the top. Clean
the side and rear windows before removal to
assist in preventing scratching during
removal of the soft top. If the plastic retainers
are difficult to operate due to road dust, etc.,
clean them with a mild soap solution and a
small brush. Cleaning products are available
through an authorized dealer.
Remove The Rear Window:
1. With the swing gate open, remove the rear
window's plastic retainers from the lower
right and left corners.
Step One
2. Grasp the swing gate bar, rotate it outward
and upward releasing it from both the right
and left retainers. Store in a safe location.
Step Two (Left Side Shown)
3. While holding the window in place, slide the
swing gate bar to the left separating it from
the rear window. Store windows in soft top
window bag (if equipped), or a safe location.
Step Three

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents