Jeep WRANGLER 2020 Owner's Manual page 448

446 MULTIMEDIA
The button on your steering wheel is also used
to access the Voice Commands for the
Uconnect Voice Command features if your
vehicle is equipped. Please see the Uconnect
Voice Command section for direction on how to
use the button.
The Uconnect Phone is fully integrated with the
vehicle's audio system. The volume of the
Uconnect Phone can be adjusted either from
the radio volume control knob or from the
steering wheel radio control.
Phone Operation
Operation
Voice commands can be used to operate the
Uconnect Phone and to navigate through the
Uconnect Phone menu structure. Voice
commands are required after most Uconnect
Phone prompts. There are two general methods
for how Voice Command works:
1. Say compound commands like "Call John
Smith mobile".
2. Say the individual commands and allow the
system to guide you to complete the task.
You will be prompted for a specific command
and then guided through the available options.
Prior to giving a voice command, one must

wait for the beep, which follows the "Listen"
prompt or another prompt.
For certain operations, compound

commands can be used. For example,
instead of saying "Call" and then "John
Smith" and then "mobile", the following
compound command can be said: "Call John
Smith mobile."
For each feature explanation in this section,

only the compound command form of the
voice command is given. You can also break
the commands into parts and say each part
of the command when you are asked for it.
For example, you can use the compound
command form voice command "Search for
John Smith," or you can break the compound
command form into two voice commands:
"Search Contact" and when asked "John
Smith." Please remember, the Uconnect
Phone works best when you talk in a normal
conversational tone, as if speaking to
someone sitting a few feet/meters away
from you.
Natural Speech
Your Uconnect Phone Voice system uses a
Natural Language Voice Recognition (VR)
engine.
Natural speech allows the user to speak
commands in phrases or complete sentences.
The system filters out certain non-word
utterances and sounds such as "ah" and "eh."
The system handles fill-in words such as
"I would like to."
The system handles multiple inputs in the same
phrase or sentence such as "make a phone
call" and "to Kelly Smith". For multiple inputs in
the same phrase or sentence, the system
identifies the topic or context and provides the
associated follow-up prompt such as "Who do
you want to call?" in the case where a phone
call was requested but the specific name was
not recognized.
The system utilizes continuous dialog; when the
system requires more information from the user
it will ask a question to which the user can
respond without pushing the Voice Command
button on your steering wheel.