Jeep WRANGLER 2020 Owner's Manual page 134

132 GETTING TO KNOW YOUR INSTRUMENT PANEL
ACC SET
When ACC is set, the set speed will display in
the instrument cluster.
The ACC screen may display once again if any
ACC activity occurs, which may include any of
the following:
System Cancel

Driver Override

System Off

ACC Proximity Warning

ACC Unavailable Warning

For further information, refer to "Adaptive
Cruise Control (ACC) — If Equipped" in "Starting
And Operating."
Fuel Economy
Push and release the up or down arrow button
until the Fuel Economy icon is highlighted in the
instrument cluster display. Push and hold the
OK button to reset average fuel economy
feature.
Toggle left or right to select a display with or
without Current Fuel Economy Information.
Range – The display shows the estimated

distance (mi or km) that can be traveled with
the fuel remaining in the tank. When the
Range value is less than 10 miles (16 kilome-
ters), the Range display will change to a
"LOW" message. Adding a significant amount
of fuel to the vehicle will turn off the "LOW"
message and a new Range value will display.
Range cannot be reset through the OK
button.
NOTE:
Significant changes in driving style or vehicle
loading will greatly affect the actual drivable
distance of the vehicle, regardless of the Range
displayed value.
Average – The display shows the average fuel

economy (MPG, L/100 km, or km/L) since
the last reset.
Current – This display shows the current fuel

economy (MPG, L/100 km, km/L) while
driving.
Trip Info
Push and release the up or down arrow button
until the Trip icon/title is highlighted in the
instrument cluster display, then push and
release the left or right arrow button to select
Trip A or Trip B.
The Trip A and Trip B information will display the
following:
Distance

Average Fuel Economy

Elapsed Time

Hold the OK button to reset all the information.
Stop/Start — If Equipped
Push and release the up or down arrow button
until the Stop/Start icon/title is highlighted in
the instrument cluster display. The screen will
display the Stop/Start status.
Audio
Push and release the up or down arrow button
until the Audio Menu icon/title is highlighted in
the instrument cluster display. This menu will
display the audio source information, including
the Song name, Artist name, and audio source
with an accompanying graphic.
Refer to "Uconnect Settings" in "Multimedia for
further information.