Jeep WRANGLER 2020 Owner's Manual page 385

Setting Name
Blind Spot Alert — If Equipped
NOTE:
If your vehicle has experienced any damage in the area where the sensor is located, even if the fascia is not damaged, the sensor may have become
misaligned. Take your vehicle to an authorized dealer to verify sensor alignment. A sensor that is misaligned results in the Blind Spot Monitor (BSM)
not operating to specification.
Hill Start Assist
Lights
After pressing the Lights button on the touchscreen, the following settings will be available:
Setting Name
Headlight Off Delay
NOTE:
When the "Headlight Off Delay" feature is selected, it allows the adjustment of the amount of time the headlights remain on after the engine is shut off.
Illuminated Approach
Automatic High Beam Headlamps — If Equipped
Daytime Running Lights
NOTE:
When the "Daytime Running Lights" feature is selected, the daytime running lights can be turned On or Off. The feature is only available if allowed by
law in the country of the vehicle purchase.
Flash Lights With Lock — If Equipped
Selectable Options
Off
On
Selectable Options
0 sec
60 sec
0
60
On
On
On
MULTIMEDIA
Lights Lights & Chime
Off
30 sec
90 sec
30
90
Off
Off
Off
383
9