Automatic Door Locks - If Equipped; Front Door Removal - Jeep WRANGLER 2020 Owner's Manual

28 GETTING TO KNOW YOUR VEHICLE
Automatic Door Locks — If Equipped
The auto door lock feature default condition is
enabled. When enabled, the door locks will lock
automatically when the vehicle's speed exceeds
15 mph (24 km/h). The auto door lock feature
can be enabled or disabled by an authorized
dealer per written request of the customer.
Please see an authorized dealer for service.

Front Door Removal

WARNING!
Do not drive your vehicle on public roads with the
doors removed as you will lose the protection they
can provide. This procedure is furnished for use
during off-road operation only.
Door Removal Warning Label
WARNING!
All occupants must wear seat belts during

off-road operation with doors removed.
Refer to "Off-Road Driving Tips" in "Starting
And Operating" for further information.
Do not store detached doors inside of the

vehicle, as they may cause personal injury
in the event of an accident.
NOTE:
Doors are heavy; use caution when removing

them.
Hinge pin can break if overtightened during

door reinstall (Max Torque: 7.5 ft· lb / 10 N·m).
Refer to "Off-Road Driving Tips" in "Starting
And Operating" for further information.
When front doors are removed, the message

"Blind Spot Alert Temporarily Unavailable"
will display in the instrument cluster display.
Power Mirrors and Power Door Locks will also
be unavailable.
1. Roll down the glass window to prevent any
damage.
2. Remove the hinge pin screws from the
upper and lower outside hinges (using a
#T50 Torx head driver).
NOTE:
The hinge pin screws and nuts can be stowed in
the rear cargo tray located under the rear load
floor.
Hinge Pin Screw