Front Fog Lights - If Equipped; Turn Signals; Lane Change Assist - If Equipped; Lights-On Reminder - Jeep WRANGLER 2020 Owner's Manual

Front Fog Lights — If Equipped
To activate the front fog lights, turn on the
parking lights or low beam headlights and push
in the center of the headlight switch control
knob. Pushing the headlight switch control knob
a second time will turn the front fog lights off.
Front Fog Light Switch

Turn Signals

Move the multifunction lever up or down and
the arrows on each side of the instrument
cluster flash to show proper operation of the
front and rear turn signal lights.
NOTE:
If either light remains on and does not flash, or
there is a very fast flash rate, check for a defec-
tive outside light bulb. If an indicator fails to
light when the lever is moved, it would suggest
that the indicator bulb is defective.
Lane Change Assist — If Equipped
Tap the multifunction lever up or down once,
without moving beyond the detent, and the turn
signal (right or left) will flash three times then
automatically turn off.

Lights-On Reminder

If the headlights, parking lights, or cargo lights
are left on after the ignition is placed in the OFF
position, a chime will sound when the driver's
door is opened.
GETTING TO KNOW YOUR VEHICLE

INTERIOR LIGHTS

Courtesy Lights

The courtesy lights will turn on when the front
doors are opened, by rotating the dimmer
controls on the headlight switch fully upward,
or, if equipped, when the unlock button is
pushed on the key fob.
The interior courtesy lights are located in the
center of the vehicle's sport bar, and consist of
one large center light and four smaller reading
lights. Each reading light can be turned on by
pushing the lens. Pushing the lens a second
time will turn the light off.
Dome Lights
45
2