Jeep WRANGLER 2020 Owner's Manual page 245

ACC will allow you to keep cruise control
engaged in light to moderate traffic conditions
without the constant need to reset your cruise
control. ACC utilizes a radar sensor and a
forward facing camera designed to detect a
vehicle directly ahead of you.
NOTE:
If the sensor does not detect a vehicle ahead

of you, ACC will maintain a fixed set speed.
If the ACC sensor detects a vehicle ahead,

ACC will apply limited braking or accelerate
(not to exceed the original set speed) auto-
matically to maintain a preset following
distance, while matching the speed of the
vehicle ahead.
The Cruise Control system has two control
modes:
Adaptive Cruise Control mode for main-

taining an appropriate distance between
vehicles.
Normal (Fixed Speed) Cruise Control mode

for cruising at a constant preset speed.
For additional information, refer to "Normal
(Fixed Speed) Cruise Control Mode" in this
section.
NOTE:
Normal (Fixed Speed) Cruise Control will not
react to preceding vehicles. Always be aware of
the mode selected.
You can change the mode by using the Cruise
Control buttons. The two control modes
function differently. Always confirm which mode
is selected.
WARNING!
Adaptive Cruise Control (ACC) is a conve-

nience system. It is not a substitute for active
driving involvement. It is always the driver's
responsibility to be attentive of road, traffic,
and weather conditions, vehicle speed,
distance to the vehicle ahead; and, most
importantly, brake operation to ensure safe
operation of the vehicle under all road condi-
tions. Your complete attention is always
required while driving to maintain safe
control of your vehicle. Failure to follow these
warnings can result in a collision and death
or serious personal injury.
STARTING AND OPERATING
WARNING! (Continued)
The ACC system:

Does not react to pedestrians,

oncoming vehicles, and stationary
objects (e.g., a stopped vehicle in a
traffic jam or a disabled vehicle).
Cannot take street, traffic, and weather

conditions into account, and may be
limited upon adverse sight distance
conditions.
Does not always fully recognize complex

driving conditions, which can result in
wrong or missing distance warnings.
On vehicles with automatic transmis-

sion, will bring the vehicle to a complete
stop while following a target vehicle and
hold the vehicle for 2 seconds in the
stop position. If the target vehicle does
not start moving within two seconds the
ACC system will display a message that
the system will release the brakes and
that the brakes must be applied manu-
(Continued)
ally. An audible chime will sound when
the brakes are released.
243
5
(Continued)