Uconnect Voice Recognition Quick Tips; Introducing Uconnect; Get Started - Jeep WRANGLER 2020 Owner's Manual

UCONNECT VOICE RECOGNITION QUICK TIPS

Introducing Uconnect

Start using Uconnect Voice Recognition (VR)
with these helpful quick tips. It provides the key
Voice Commands and tips you need to know to
control your Uconnect 3, Uconnect 4, or
Uconnect 4C/4C NAV system.
Uconnect 3
Uconnect 4
Uconnect 4C NAV
MULTIMEDIA
If you see the NAV icon on the bottom bar or in
the Apps menus of your 8.4-inch touchscreen,
you have the Uconnect 4C NAV system. If not,
you have a Uconnect 4C with 8.4-inch display
system.

Get Started

All you need to control your Uconnect system
with your voice are the buttons on your steering
wheel.
1. Visit UconnectPhone.com to check mobile
device and feature compatibility and to
find phone pairing instructions.
2. Reduce background noise. Wind noise and
passenger conversations are examples of
noise that may impact recognition.
3. Speak clearly at a normal pace and volume
while facing straight ahead. The microphone
is positioned in the middle console above the
rearview mirror and aimed at the driver.
4. Each time you give a Voice Command, you
must first push either the Voice Recognition
(VR) or Phone button, wait until after the
beep, then say your Voice Command.
461
9