Jeep WRANGLER 2020 Owner's Manual page 31

3. Remove the plastic wiring access door
under the instrument panel by sliding the
plastic panel along the door frame toward
the seats until the tabs are detached.
Wiring Access Door
NOTE:
Do not pry back to open, as this will break the
plastic cover.
4. Pull up on the red locking tab to unlock the
wiring harness.
Closed Wiring Harness
1 – Locking Tab
2 – Wiring Harness
5. Push and hold down the black security tab
under the wiring harness, and lift the
harness into the open position.
GETTING TO KNOW YOUR VEHICLE
Open Wiring Harness
1 – Wiring Harness
2 – Security Tab
6. With the wiring harness open, pull
downward on the wiring connector to
unplug. Store the wiring connector in the
lower door basket.
29
2