Bulb Replacement - Jeep WRANGLER 2020 Owner's Manual

Bulb Name
Premium Fog Lamps
Rear Premium LED Tail Lamps
Rear Base Tail Lamp Stop/Tail/Turn Bulb
Rear Base Tail Lamp Backup Bulb
Rear Base Tail Lamp Side Marker
Center High Mounted Stop Lamp (CHMSL)
License Lamp
NOTE:
Numbers refer to commercial bulb types that can be purchased from an authorized dealer. If a bulb needs to be replaced, visit an authorized dealer
or refer to the applicable Service Manual.

Bulb Replacement

NOTE:
Lens fogging can occur under certain atmo-
spheric conditions. This will usually clear as
atmospheric conditions change to allow the
condensation to change back into a vapor.
Turning the lamps on will usually accelerate the
clearing process.
Exterior Bulbs
LED – (Serviced at an Authorized Dealer)
LED – (Serviced at an Authorized Dealer)
3157
7440
LED – (Serviced at an Authorized Dealer)
LED – (Serviced at an Authorized Dealer)
LED – (Serviced at an Authorized Dealer)
Halogen Headlamps
1. Open hood and support using prop rod.
2. Remove the front grille. Turn the retainers
along the top a quarter turn counter-
clockwise and remove.
3. Pull the bottom of the grille away starting at
one side and working toward the other.
4. Remove the three screws holding the
headlamp to the vehicle.
IN CASE OF EMERGENCY
Bulb Number
5. Remove lamp from the vehicle.
6. Remove the lamp from the collar.
7. Grasp the bulb and rotate a quarter turn
counterclockwise.
8. Pull the bulb from the housing.
9. Push connector locking tab to the unlock
position.
10. Remove connector from bulb.
289
6