After pressing the Audio button on the touchscreen, the following settings will be available:
Setting Name
Equalizer
NOTE:
When in this display, you may adjust the "Bass", "Mid", and "Treble" settings. Adjust the settings with the + and – setting buttons or by selecting any
point on the scale between the + and – buttons. Bass/Mid/Treble also allow you to simply slide your finger up or down to change the setting as well
as press directly on the desired setting.
Balance/Fade
NOTE:
When in this display, you may adjust the "Balance/Fade" of the audio by using the Arrow button on the touchscreen to adjust the sound level from
the front and rear or right and left side speakers. Press the Center C Button on the touchscreen to reset the balance and fade to the factory setting.
Speed Adjusted Volume
NOTE:
When in this display, you may adjust the Uconnect system's ability to increase audio volume to compensate for increased speeds and road noise.
Select the desired setting from Off to 3 to increase the audio volume as speeds increase.
Surround Sound — If Equipped
Auto Play
NOTE:
The "Auto Play" feature automatically starts playing audio when a USB device is connected and turned on.
Loudness
NOTE:
The "Loudness" feature improves sound quality at lower volumes when enabled.