Jeep WRANGLER 2020 Owner's Manual page 76

74 GETTING TO KNOW YOUR VEHICLE
4. Set the rear door frame pin into the hole on
top of the body side, just behind the rear
door opening.
Step Four
5. Carefully position the top of the door frame
onto the rear of the front door rail, making
sure rubber seals lay flat. Ensure the seals
are installed correctly to avoid water leaks.
Position Of Frame Above Door
1 — Front Door Rail
2 — Rear Door Frame
6. Swing the frame bracket around the side of
the rail, and insert the screws from
underneath. Tighten with #40 Torx head
driver until they are snug, being careful not to
cross-thread the screws or overtighten. Refer
to the table above for the appropriate torque
specifications for the door rail screws.
Step Six