Driving Tips; On-Road Driving Tips; Off-Road Driving Tips - Jeep WRANGLER 2020 Owner's Manual

DRIVING TIPS

On-Road Driving Tips

Utility vehicles have higher ground clearance
and a narrower track to make them capable of
performing in a wide variety of off-road
applications. Specific design characteristics
give them a higher center of gravity than
conventional passenger cars.
An advantage of the higher ground clearance is
a better view of the road, allowing you to
anticipate problems. They are not designed for
cornering at the same speeds as conventional
passenger cars any more than low-slung sports
cars are designed to perform satisfactorily in
off-road conditions. Avoid sharp turns or abrupt
maneuvers. As with other vehicles of this type,
failure to operate this vehicle correctly may
result in loss of control or vehicle rollover.

Off-Road Driving Tips

Side Step Removal — If Equipped
NOTE:
Prior to off-road usage, the side steps should be
removed to prevent damage if so equipped.
1. Remove both nuts and bolt from the
underside of the vehicle for each bracket.
Underside Nuts
2. Remove the side step assembly.
STARTING AND OPERATING
Bumper End Cap Removal
The end caps on your vehicle's front bumper
can be removed by following the steps below:
NOTE:
Bumper end caps are removable on steel
bumper only.
1. Loosen the two bolts that retain the GAWR
bracket (Bolts #1 and #2) to the end cap
using a T45 torx bit screw driver. Do not
remove the bolts.
Bolt #1
275
5