C. Configuration with CPX node
C.3.3 Save actual configuration as the nominal configuration
Festo P.BE−CPX−CMA X−CONTROL−EN en 0908NH
Fig. C/15: Idle mode parametrisation for example Tab. C/9
In order for the settings to take effect, the global system
parameter must be set to Use idle mode".
In order to save the changes permanently, after the changes:
the actual configuration must be saved as the nominal
configuration,
or the project must be loaded into the CPX−FEC (a pro
gram must exist for this).
Note
Make sure that you have supplied taught parameters, or
parameters edited via the keyboard or the CPX−MMI, to the
CPX configurator.
C−31