Software; Needed Software; Configuration Ips Of Cecc-Xand Cmmp - Festo YJKP Quick Start Manual

Software

5 Software
5.1

Needed software

You will find all needed software on the support portal in the tab "Software" by searching for "YJKP".
This package includes
• Festo Field Device Tool (FFT)
• Application software GSAY-A4-F0-Z4-... (actual and previous version of YJKP-software)
• Firmware CECC-X-M1-YJKP (needed firmware for the GSAY)
• GSDML for Profinet
• Online help file
• Release notes
5.2 Configuration IPs of CECC-X and CMMP
All used components (CECC-X, CMMP, PC) need to be in the same IP range. Otherwise it is not possible to
do the configuration. Their default IP is different!
The IP of your PC has to be changed in your system settings.
You can set the IPs (CECC-X and CMMP) with the Festo Field Device Tool (FFT).
Open FFT and scan your network. You should find minimum the CECC-X and CMMP.
Page 20 of 29 Application Note – YJKP - Quick Start Guide EVO3 – 1.20