C. Configuration with CPX node
C.2
CPX−FB11 (DeviceNet)
C.2.1 Configuring DeviceNet station properties (EDS)
Sources of supply
C−16
General information on the CPX−FB11 are found in the de
scription on the P.BE−CPX−FB11−...
When starting up a new DeviceNet station for the first time,
you must inform your configuration program about certain
properties of the station.
The features of the various slaves are usually administered by
the configuration program in a list or library e. g. E DS library
(EDS for electronic data sheets).
The following possibilities can be used with the CMAX:
Install EDS files: modular EDS.
Parametrising of technology modules such as the CMAX is
only supported via modular EDS.
Manually enter the slave features (no parameter setting
possible).
Observe the notes in the manual for the CPX−FB11.
Source of supply for EDS files
Current EDS files and picture files (icons) can be found in
the Internet under the following address:
è www.festo.com è Downloads è Download Area: Soft
ware, drivers and firmware è Enter string: Fieldbus GSD/
EDS or CMAX
Festo P.BE−CPX−CMA X−CONTROL−EN en 0908NH