Device Data - Festo CPX Series Manual

5. Parameter

5.4.2 Device data

Manufacturer hardware version
PNU PNU: 100
Values Without unit
Default: 0x0100
Coding of the CMAX hardware version.
The version number is BCD−encoded, the upper 16 bits are not used.
Format: 0x0000HHNN (HH = main version, NN = secondary version)
ý The parameter value cannot be changed.
o Writing permissible only in commissioning/parametrising mode with disabled controller.
o This parameter can be written by FCT without higher−order controller.
o After writing, controller recalculation is carried out.
Manufacturer firmware version
PNU PNU: 101
Values Without unit
Default: 0x0100
Coding of the CMAX firmware version. The version number is encoded as BCD.
Format: 0xBBBBHHNN
(BBBB = build number/output version, HH = main version, NN = secondary version)
Example: 0x05050100 corresponds to the version V01.00.0505
ý The parameter value cannot be changed.
o Writing permissible only in commissioning/parametrising mode with disabled controller.
o This parameter can be written by FCT without higher−order controller.
o After writing, controller recalculation is carried out.
Version FHPP
PNU PNU: 102
Values Without unit
Default: 0x0110
Coding of the implemented FHPP version.
The FHPP version is changed in the event of fundamental adjustments of the FHPP definition.
Format: 0x0000HHNN (HH = main version, NN = secondary version)
ý The parameter value cannot be changed.
o Writing permissible only in commissioning/parametrising mode with disabled controller.
o This parameter can be written by FCT without higher−order controller.
o After writing, controller recalculation is carried out.
Festo P.BE−CPX−CMAX−CONTROL−EN en 0908NH
Index: 1 Max index: 1
Minimum: −
Index: 1 Max index: 1
Minimum: −
Index: 1 Max index: 1
Minimum: −
Class: Var Data type: int32
Maximum: −
Class: Var Data type: int32
Maximum: −
Class: Var Data type: int32
Maximum: −
5−25