C.3.2 Cmax Parametrisation - Festo CPX Series Manual

C. Configuration with CPX node
Module
CPX−CMAX
Tab. C/8: Technology module CMAX

C.3.2 CMAX parametrisation

Festo P.BE−CPX−CMA X−CONTROL−EN en 0908NH
Input word / Output word addresses
Set the start address of the input word and output word of
the CMAX.
Module Allocated
identifiers address space
T21 CMAX−1 4 Input words
(8 bytes)
4 Output words
(8 bytes)
The CMAX has no module parameters.
Fig. C/14: No module parameters
Remarks
For assignment of the addresses
depending on the operating
mode, see section 2.2.
For an example, see section
C.3.4.
C−29