Planning Aspects When Parametrising The Cmax - Festo CPX Series Manual

1. CPX terminal configuration and FHPP overview
1.1

Planning aspects when parametrising the CMAX

1.1.1 Instructions on the available CPX nodes
CPX node
CPX−CEC
CPX−FEC
CPX−FB6 (Interbus)
CPX−FB11 (DeviceNet)
CPX−FB13 (PROFIBUS−DP)
CPX−FB14 (CANopen)
CPX−FB23 (CC−Link)
CPX−FB32 (Ethernet/IP)
CPX−FB33 (PROFINET, M12) From Revision 7 (R7)
CPX−FB34 (PROFINET, RJ45) From Revision 7 (R7)
CPX−FB38 (EtherCAT)
1)
Revisions version (Rev...), see name plate. Older revisions are not suitable for use with the CMAX
and can lead to unpredictable behaviour.
Tab. 1/1: Instructions/special features/references for CPX nodes
Festo P.BE−CPX−CMA X−CONTROL−EN en 0908NH
Tab. 1/1 shows an overview of the available CPX nodes
(CPX−FEC or CPX bus nodes) that are suitable for operation
with the CMAX (as of August 2009).
1)
Required version
in preparation
From Revision 18 (R18)
From Revision 22 (R22)
From Revision 20 (R20)
From Revision 23 (R23)
From Revision 20 (R20)
From Revision 19 (R19)
From Revision 11 (R11)
All
General parametrisation instructions are provided in the
description for the used CPX node.
Use For a description see
On request
On request Appendix C.3
On request
suitable Appendix C.2
suitable Appendix C.1
On request
On request
On request
On request
On request
On request
1−3