Split Up: Parametrising Via The I/O Diagnostic Interface - Festo CPX Series Manual

4. Faults and diagnostics

4.5.3 Split up: Parametrising via the I/O diagnostic interface

Festo P.BE−CPX−CMA X−CONTROL−EN en 0908NH
In principle, parameters can also be changed via the CPX bus
nodes or CPX−FEC−specific functions, such as acyclic services
etc.
The CMAX parameters are accessed via the I/O diagnostic
interface, see Tab. 4/23.
Information on the parametrisation can be found in the de
scription of the CMAX communication profile.
1)
Function number
4828 + m*64 + 0 ... 5
4828 + m*64 + 6
4828 + m*64 + 7
4828 + m*64 + 8 ... 11
4828 + m*64 + 12 ... 61
4828 + m*64 + 62, 63
1)
m = module number
Tab. 4/23: I/O diagnostic interface
Parameter entry
reserved (standard module parameters,
are not used by the CMAX).
Reserved for special module settings of
the CMAX. the CMAX
Task control
50 byte data (depending on the task).
reserved
4−51