3.3.1 IOT Image Defect Sample
This section describes some Defect Samples and the actions to be taken in case of the follow-
ing IOT problems:
•
IDS1
Auger Mark
•
IDS2
Strobing (27mm or 13.5mm Pitch Density)
•
IDS3
White Streaks (Process Direction)
•
IDS4
Black Bands
•
IDS5
Toner Contamination
•
IDS6
Toner Splattering
•
IDS7
White Spots (Irregular)
•
IDS8
Regular Blank Areas in Process Direction (Spots, Streaks, Bands etc.)
•
IDS9
Regular Toner Contamination in Process Direction (Spots, Streaks, Bands etc.)
•
IDS10
Regular Toner Contamination in Process Direction (Side 2)
Initial Issue
WorkCentre 5021/5019
3.3.2 IIT Image Defect Sample
This section describes some Defect Samples and the actions to be taken in case of the follow-
ing IIT problems:
•
IDS11
Moire Due to Interference With Copy Documents
•
IDS12
Light Background Due to Background Suppression in Copies of Documents With
Frames
•
IDS13
Background Smear When Using Platen Copy With Non-Standard Documents
•
IDS14
Fluctuation In Background Suppression Values for Copies of Documents With
Medium Density
•
IDS15
Defects Related To Scan Print
08/2012
3-15
Image Quality
3.3.1, 3.3.2