Composition Of Chapter 3 Image Quality Troubleshooting; Test Pattern - Xerox WorkCentre 5021 Service Documentation
Hide thumbs
Also See for WorkCentre 5021:
- Specifications (10 pages) ,
- Network addendum (50 pages) ,
- User manual (184 pages)
Table of Contents
Advertisement
3.1.1 Composition of Chapter 3 Image Quality
Troubleshooting
1.
Chapter 3 Image Quality Troubleshooting is mainly composed of two sections:
Test Pattern and Image Quality Troubleshooting.
2.
The Test Pattern section contains the method to output the Built-in Test Patterns for the
copy quality check.
3.
The Image Quality Specifications section also contains
4.
The Image Quality Troubleshooting section describes the causes of image quality failures
and the troubleshooting procedure for them.
Initial Issue
WorkCentre 5021/5019
3.1.2 Test Pattern
The following are the test patterns that are used.
1.
2.
3.
[6.1.24
Alignment Specifications].
4.
08/2012
3-3
The copy quality check mainly uses the Test Pattern (Mono A3) (499T 00247).
For copy quality check, Standard paper is used.
The Built-in Test Patterns are stored in the following locations.
(1) IOT ESS/MCU PWB
For the Test Patterns, refer to the following.
•
6.4.2.14
Test Pattern Print
Image Quality
3.1.1, 3.1.2
Advertisement
Chapters
Table of Contents
Troubleshooting
