Figure 2 j0lj40806
Initial Issue
WorkCentre 5021/5019
REP 8.2.2 Dispense Drive
Parts List on
PL 8.2
Removal
When turning OFF the power switch, check that the 'Data' lamp is OFF and that there is
no Job in progress.
Turn OFF the power switch and make sure that the screen display turns OFF.
Check that the power switch is OFF and unplug the power plug.
1.
Remove the Drum Cartridge.
2.
Remove the Toner Cartridge.
3.
Remove the Front Cover.
(REP
4.
Remove the Top Cover.
(REP
5.
Remove the Cartridge Guide.
6.
Remove the Dispense Drive. (Figure 1)
(1) Remove the gear.
(2) Remove the screw (x3).
(3) Remove the Dispense Drive.
Replacement
1.
To install, carry out the removal steps in reverse order.
08/2012
4-27
WARNING
(REP
8.1.1)
(PL
8.1)
19.1.1)
19.1.2)
(REP
8.2.1)
Figure 1 j0lj40807
Repairs and Adjustments
REP 8.2.1, REP 8.2.2