Rep 56.9.2 Retard Chute - Xerox WorkCentre 5021 Service Documentation

Figure 4 j0lj45617
Replacement
1. To install, carry out the removal steps in reverse order.
Repairs and Adjustments
REP 56.9.1, REP 56.9.2

REP 56.9.2 Retard Chute

Parts List on PL 56.9
Removal
When turning OFF the power switch, check that the 'Data' lamp is OFF and that there is
no Job in progress.
Turn OFF the power switch and make sure that the screen display turns OFF.
Check that the power switch is OFF and unplug the power plug.
1. Remove the DADF Front Cover.
2. Remove the DADF Rear Cover.
3. Remove the Document Tray.
4. Open the Retard Chute.
5. Remove the Retard Chute. (Figure 1)
(1) Remove the Retard Chute in the direction of the arrow.
08/2012
4-78
WARNING
(REP 56.2.1)
(REP 56.2.2)
(REP 56.9.1)
Figure 1 j0lj45647
WorkCentre 5021/5019
Initial Issue