Xerox WorkCentre 5021 Service Documentation page 287

6.1.23 Print Area
6.1.23.1 Paper Sizes that Can be Transported
The minimum and maximum paper sizes that can be transported in the Main Unit are as fol-
lows:
• Minimum transportable paper size:
– Width IOT/STM: 182 mm (B5 SEF), MSI: 139.7 mm (5.5x8.5 SEF)
– Length: 182 mm (B5 LEF)
• Maximum transportable paper size:
– Width: 297.0 mm (A3)
– Length: 431.8. mm (11x17)
6.1.23.2 Maximum Print Area
The printable area defines the area where the image can be printed. The maximum printable
area of the Main Unit is as follows.
• Maximum printable area: 297.0 mm wide x 425.8 mm long
6.1.23.3 Maximum Print Guaranteed Area
The area where the image quality is guaranteed is referred to as Print Guaranteed Area. The
Print Guaranteed Area of the Main Unit is as follows.
• Maximum print guaranteed area: 289.0 mm wide x 423.4 mm long
However, this print area is fully applied only when the Copy Job and Print Job uses paper
with size A3 SEF in width direction or 11x17' SEF in length direction.
General Procedures
6.1.23
08/2012
6-18
Initial Issue
WorkCentre 5021/5019