071-105 Regi Sensor On Jam (Tray 1)
BSD-ON:CH8.3, CH4.1,
CH8.1
During paper feed from Tray 1, the Regi Sensor did not turn ON within the specified time after
the Tray 1 Feed Clutch On.
Cause/Action
Check the following:
•
The Regi Sensor (Input Check [071-105]) for operation failure.
•
The Main Drive Motor (Output Check [042-001]) for operation failure.
•
The Tray 1 Feed Clutch (Output Check [072-001]) for operation failure.
•
The Feed Roll for contamination, wear, and transportation failure due to deterioration.
•
The Drive Gear for wear and damage.
•
A paper transportation failure due to foreign substances on the paper path.
•
Usage of out of spec paper.
If no problems are found, replace the ESS/MCU PWB.
Initial Issue
WorkCentre 5021/5019
(PL
15.1)
(PL
3.1)
(PL
9.1)
(PL
18.1)
08/2012
2-35
Status Indicator RAPs
071-105