Xerox WorkCentre 5021 Service Documentation page 285

6.1.19 Output Function
6.1.19.1 Center Tray
Supported Size: All paper sizes handled by the machine
Capacity: The average values of the no. of sheets that can be accommodated are as follows
(using fresh paper).
Configuration Output Tray Paper Type
Center Tray Top of machine A4 LEF Standard Paper (P Paper) 250 sheets
Heavyweight (90 to 110 gsm)
• The above is Simplex print
• The ability to accomodate A4 SEF and Letter SEF is not defined.
• Full Stack detection: None
• Finishing Capability
– Can easily sort without folding or messing up the order
– Paper curl: 20 mm or less (standard paper, 22 degrees C/55% RH)
• Output orientation: Face down
6.1.19.2 SCT
SCT (Simple Catch Tray) output function not available.
6.1.19.3 OCT
OCT (Offset Catch Tray) output function not available.
6.1.19.4 Side Tray
Side Tray output function not available.
General Procedures
6.1.19, 6.1.20
Table 1
Output Capacity
50 sheets
6.1.20 Resolution/Gradation
6.1.20.1 IOT Unit
• Resolution
Fast Scan: 600 dots/25.4 mm (by the ESS), Slow Scan: 600 dots/25.4 mm
• Gradation
256 Gradation
6.1.20.2 Copy Quality/Resolution
• Data Resolution: Processing resolution for ESS output
Printing Type
BW Data Resolution (dpi)
Depth
IE (Black Text only)
• Output Resolution: The resolution that is printed by the IOT after receiving the above ESS
data
Printing Type
BW Output Resolution (dpi)
Depth
IE (Black Text only)
08/2012
6-16
Table 1
Standard
600X600
1bit
None
Table 2
Standard
600X600
1bit
None
WorkCentre 5021/5019
Initial Issue