Xerox WorkCentre 5021 Service Documentation page 74

Y N
Enter DC330[XXX-XXX] and turn the SOL RELEASE ON. Is +24VDC measured
between the NIP/RELEASE SOLENOID pin-2 (+) and the GND (-)?
Y N
Replace the NIP/RELEASE SOLENOID.
Check the connection between the PWB pin-6 and the NIP/RELEASE SOLENOID pin-2
for an open circuit and poor contact.
Replace the PWB.
Initial Issue
WorkCentre 5021/5019
08/2012
2-63
Status Indicator RAPs
2.2.4.8