Xerox WorkCentre 5021 Service Documentation page 187

Figure 8 j0lj45664
Replacement
1. To install, carry out the removal steps in reverse order.
2. When installing the Bearing of the DADF Takeaway Roll, align the Cutout of the DADF
Takeaway Clutch at the Rear side to the Tab of the Bracket of the DADF Feed Motor. (Fig-
ure 9)
Figure 9 j0lj45665
3. When installing the Bracket and Ground Plate, install the Ground Plate as shown in the
figure.
(Figure 10)
Initial Issue
WorkCentre 5021/5019
08/2012
4-85
Figure 10 j0lj45640
Repairs and Adjustments
REP 56.10.2