Xerox WorkCentre 5021 Service Documentation page 284

6.1.17 Classifications and Functions
6.1.17.1 Classifications and Functions
This section describes the relationship between paper type selection and paper feeding.
The Paper Type Settings for the Main Unit Tray and Option Trays can be set at the Key Opera-
tor Tools Mode (KO) or the CE Mode.
The Paper Type Settings for the MSI can also be set in the same way as for the Main Unit
Trays at the KO Mode or the CE Mode.
O: Possible, X: Not Possible
UI
Classificati IOT Paper Weight
Tray on Type Data gsm
Tray 1 Plain Normal Paper 64-90
Lightweight Thin Paper 60-63
STM Plain Normal Paper 64-90
Lightweight Thin Paper 60-63
MSI Plain Normal Paper 64-90
Heavy- Thick Paper 1 91-110 O
weight
Lightweight Thin Paper 60-63
6.1.17.2 Classifications and Paper Types
This is not specified as there is no classification.
Initial Issue
WorkCentre 5021/5019
Table 1
Function
Paper Size
Non- Automati
Standard Standard c 2 Sided
Size Size Print
O X O
O X O
O X O
O X O
O X O
X O
O X O
6.1.18 Auto 2 Sided Printing
The paper sizes and weights that can be used for 2 sided print are as follows.
1. Paper Size (Standard Sizes only. Non-Standard Sizes are not supported.)
• Min: B5 SEF
Min: A5 SEF, 5.5 X 8.5' SEF (MSI)
• Max: A3 SEF, 11x17' SEF
2. Paper Weight
• 60 gsm~110gsm*
*: 91 gsm to 110 gsm is for MSI only
Output
Exit1
O
O
O
O
O
O
O
08/2012
6-15
General Procedures
6.1.17, 6.1.18