Xerox WorkCentre 5021 Service Documentation page 321

Chain-Link NVM Name
741-034 NOHAD_FAN_FAIL_ERROR_COUNT_THRESHOLD 5
741-035 NOHAD_FAN_FAIL_BYPASS
General Procedures
6.3.8
Table 1 NVM DRIVE & NOHAD
Setting Setting
Range Range
(Minimum (Maximum Default
Value) Value) Value
150 24
0 1 0
08/2012
6-52
Write Initialization
Yes/No Yes/No Description
Enable Enable The threshold count for determining a Fail by the Fan Fail
Accumulated Time.
If an abnormal Fan Fail Determination Pulse Count (num-
ber of times) is detected in the Fail Accumulated Time, it
will be judged as a Fail.
(Unit: times)
Enable Enable FAN Fail Bypass
0: Bypass OFF
1: Bypass ON
Initial Issue
WorkCentre 5021/5019