Xerox WorkCentre 5021 Service Documentation page 366
Hide thumbs
Also See for WorkCentre 5021:
- Specifications (10 pages) ,
- Network addendum (50 pages) ,
- User manual (184 pages)
Table of Contents
Advertisement
Figure 2 j0lj64004
3.
Pressing the [Auto Stop] or [Stop] button causes the [End] to flash twice -> remain ON to
indicate that the Input Check has completed.
4.
Pressing the [Clear All] button returns you to the [Chain-Link Number Entry] screen.
Initial Issue
WorkCentre 5021/5019
6.4.2.7 Maintenance Report
Purpose
Prints the Maintenance items that can be set from and displayed on the CE Mode.
Procedure
1.
Enter the CE Diag Mode and input 999-980 in the Chain-Link.
2.
Set the [Paper Size] using the [Paper Supply] button.
3.
Pressing the [Start] button prints the Maintenance Report using the following settings.
•
1 Sided Print - fixed. (The Maintenance Report cannot be printed using 2 Sided.)
•
Quantity: 1 - fixed.
4.
An animation will be displayed when this is in progress.
5.
After the last output or when the [Stop] button is pressed, [End] will be displayed.
6.
Pressing the [Clear All] button returns you to the [Chain-Link Number Entry] screen.
08/2012
6-97
Figure 1 j0lj64012
General Procedures
6.4.2.6, 6.4.2.7
Advertisement
Chapters
Table of Contents
Troubleshooting
