Xerox WorkCentre 5021 Service Documentation page 183

Figure 4 j0lj45634
12. Remove the Bracket and Ground Plate at the front. (Figure 5)
(1) Remove the Tapping Screw (x3).
(2) Loosen the screw.
(3) Remove the Bracket and Ground Plate.
Figure 5 j0lj45636
Initial Issue
WorkCentre 5021/5019
NOTE: Be careful so as to not lose the gear under the Bracket and Ground Plate. (Figure
6)
13. Remove the Knob Handle. (Figure 7)
(1) Remove the gear.
(2) Remove the Knob Handle.
14. Remove the bearing at the front. (Figure 8)
08/2012
4-81
Figure 6 j0lj45641
Figure 7 j0lj45637
Repairs and Adjustments
REP 56.10.1