Xerox WorkCentre 5021 Service Documentation page 175

Figure 4 j0lj45621
8. Disconnect the connector of the DADF Feed Clutch and remove the wire harness from
the Harness Guide. (Figure 5)
(1) Disconnect the connector.
(2) Remove the wire harness from the Harness Guide.
Figure 5 j0lj45622
9. Disconnect the connector of the DADF Feed Motor. (Figure 6)
(1) Disconnect the connector.
Initial Issue
WorkCentre 5021/5019
10. Remove the Harness Guide and the wire harness. (Figure 7)
(1) Remove the screw and the Ground Wire.
(2) Remove the screw.
(3) Remove the Harness Guide and the wire harness.
Reference: This shows the removed Harness Guide and wire harness. (Figure 8)
08/2012
4-73
Figure 6 j0lj45623
Figure 7 j0lj45624
Repairs and Adjustments
REP 56.6.1