Setting The Technology For Simulation - Siemens SINUMERIK 828D Commissioning Manual

6.2

Setting the technology for simulation

Turning technology
Examples of machine kinematics:
● Conventional turning with two geometry axes
● Three spindles: Main spindle, counterspindle, tool spindle
● Counterspindle slides, tailstock as NC axis
● B axis: Aligning turning tools in the tool spindle
● Milling with geometry axes: TRANSMIT, TRACYL, TRAANG
Machine data for the turning technology:
MD52200 $MCS_TECHNOLOGY = 1
MD52000 $MCS_DISP_COORDINATE_SYSTEM = 34
Milling technology
Examples of machine kinematics:
● Milling with five axes: Swivel/TRAORI
● Swivel head change
Machine data for the milling technology:
MD52200 $MCS_TECHNOLOGY = 2
MD52000 $MCS_DISP_COORDINATE_SYSTEM = 0
Grinding technology
Machine data for the grinding technology:
MD52200 $MCS_TECHNOLOGY = 3
MD52200 $MCS_TECHNOLOGY = 4
MD52000 $MCS_DISP_COORDINATE_SYSTEM = 0
MD52000 $MCS_DISP_COORDINATE_SYSTEM = 6
Meaning of the axes
MD52206 $MCS_AXIS_USAGE[n]
= 0
= 1
SINUMERIK Operate
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
No special meaning
Tool spindle (driven tool)
Simulation and simultaneous recording
6.2 Setting the technology for simulation
Turning technology
Position of the coordinate system (exam‐
ple)
Milling technology
Position of the coordinate system (example)
Cylindrical grinding technology
Surface grinding technology
Cylindrical grinding and surface grinding
with moving column (example)
Surface grinding with table machine (exam‐
ple)
Meaning of the axes in the channel
[n] channel axis number
67