Siemens SINUMERIK 828D Commissioning Manual page 522

Configuring cycles
7.7 Swiveling
Kinematics
Rotary axis 2
Angular range
1) Calculation of rotary axis vector:
V1: β = -45 degrees
V1Y = sin(-45) = -0.7071
V1Z = cos(-45) = 0.7071
V1Y and V1Z can be normalized to -1 and 1.
Example 4: Swivel head/rotary table "MIXED_45"
The vectors in the drawing refer to the initial setting of the kinematics. The spindle (tool adapter)
is positioned on a gage block above the top edge of the table/center of the table (rotary axis
C). A test mandrel in the spindle is used to determine the center of rotation of rotary axis C.
154
Swivel table
C
0.000
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
Mode
TABLE_45
Auto
360.000
SINUMERIK Operate