Example: Circuitry For A Cu With Line Contactor - Siemens SINUMERIK 828D Commissioning Manual

5.5.3

Example: Circuitry for a CU with line contactor

Example
The circuitry shown refers to the assignment of the terminals in the previous chapters.
Figure 5-20
Smart Line Module connection
The connections for the digital in/outputs X122 and X132 are on the rear side of the control.
CNC commissioning
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
Circuitry for a Control Unit with line contactor
Commissioning the drive
5.5 Terminal assignments
149