Siemens SINUMERIK 828D Commissioning Manual page 317

End acknowledgment
Acknowledg‐
ment step
xxx
The step New tool from gripper 1 to spindle can be omitted and replaced by a total
acknowledgment. This also informs the tool management that all tools are in their target
positions.
Acknowledg‐
ment step
CNC commissioning
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
Acknowledgment Transfer step for the
bit new tool
DB4200.DBXx.x 0
Acknowledgment Transfer step for the
bit new tool
DB4200.DBX0.0
Tool management
9.6 Example: Change manual tools
Transfer step for the Status
old tool
0 1
Transfer step for the Status
old tool
(99)
303