Siemens SINUMERIK 828D Commissioning Manual page 618

Tool management
9.2 Configuring the user interface
Entries
Width
DisplayMode
DecimalPlaces
ItemType
BitMask
AccessLevel
UpperLimit
LowerLimit
Example
In the following example, the <GeoRadius> parameter is used.
Only enter the modified data.
<PARAMETERCONFIGURATION>
250
Meaning
Column width in pixels in relation to a 640 x 480 resolution.
See example below: The default column width is changed to 53 pixels.
Values that the parameter is displayed with.
See example below: The default setting is changed to "DoubleMode".
The following values can also be accepted:
AnyMode
IntegerMode
UnsignedIntegerMode
DoubleMode
UnsignedDoubleMode
Length
Angle
LinearFeedPerTime
LinearFeedPerRevolution
LinearFeedPerTooth
RevolutionSpeed
ConstantCuttingSpeed
Number of decimal places if "DoubleMode" or "UnsignedDoubleMode" is selected
in the DisplayMode.
See example: Two decimal places are entered.
Field types in which a value is displayed.
TextField
TextFieldReadOnly
CheckBox
CheckBoxReadOnly
Bit mask for the display of a bit from a value. The bit mask is entered as integer
value. Bit 0 → 1, Bit 1 → 2, Bit 2 → 4
Value for the access level that is used for these parameters in the user interface.
Value range 1 to 7
Upper input limit for these parameters in the user interface.
Only applies for numerically entered parameters.
Lower input limit for these parameters in the user interface.
Only applies for numerically entered parameters.
<GeoRadius>
All characters
Integers
Unsigned integers
Values with decimal places
The number of decimal places is specified in "Dec‐
imalPlaces"
Unsigned values with decimal places
The number of decimal places is specified in "Dec‐
imalPlaces"
Specified length
Specified angle
Linear feed in mm/minute
Linear feed in mm/revolution
Linear feed in mm/tooth
Speed
Constant cutting rate
Input/output field for values and texts
Output field for values and texts
Input/output field for states
Output field for states
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
SINUMERIK Operate