Trace Options; Starting The Trace - Siemens SINUMERIK 828D Commissioning Manual

Service and diagnostics
10.4 Trace
If the time has expired
If the memory is full
10.4.2.3

Trace options

You define the following properties of a trace session in the "Trace - Options" window.
● Setting the graphic window
– Displaying main grid lines: You define whether a horizontal grid is displayed and in which
– Displaying grid sub-lines: You define whether a vertical grid should be displayed and in
– Background: You select the background color of the graphic window.
● Defining storage options
– Activate the "Confirm file overwrite" checkbox in order to receive a confirmation prompt
– Activate the "Save file in both formats" checkbox in order to also save the data as a csv
Procedure
10.4.3

Starting the trace

In the "Trace" window, you obtain the curve with the data of the variables selected for a trace
session.
The diagram comprises two Cartesian coordinates:
● Time axis
The horizontal x axis supplies the time values.
● Value axis
The vertical y axis displays the resolution fineness (amplitude).
350
color.
which color.
each time a trace session is to be overwritten. If the checkbox is deactivated, the trace
session is overwritten without a confirmation prompt.
file (Page 361) in addition to the xml session file. The file in csv format cannot be
imported again.
1. You are in the "Select Variables for Trace: ..." window and a trace ses‐
sion has been selected.
2. Press the "Options" softkey.
The "Trace - Options" window opens.
3. Select the desired settings and press the "OK" softkey in order to accept
the settings.
Defines the period which after expiry, the recording is exited.
The recording is terminated when the specified data volume
(KB) is reached.
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
SINUMERIK Operate