Operating software settings
3.4 Setting the operating software languages
Note
The dictionaries are also stored in the commissioning archive when "HMI data" is selected
(see also: Which data is backed up in the archive? (Page 334))
3.4.4
This is how you enter the Chinese character
Entering Chinese characters
A character is selected using a phonetic spelling ("pinyin method"): whose sound can be
formed by combining Latin letters.
1. Enter the sound by combining Latin letters.
The editor lists a selection of characters that correspond to that particular sound.
2. Select the desired character using the cursor keys:
Figure 3-3
If you switch over the option field to enter Latin letters using the <SELECT> key, then the
entries are directly transferred to the text box that had the focus before the Chinese editor was
opened.
44
Example: Chinese simplified
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
CNC commissioning