Interconnections (Dialog) - Siemens SINUMERIK 828D Commissioning Manual

Commissioning the drive
5.5 Terminal assignments
Axis/spindle test run
Drive:
Parameter/terminal
p0840
p0844
p0845
p0848
p0849
p0852
X21.3 (+24 V) and X21.4 (ground)
p0864
p1140
p1141
p1142
Infeed:
Parameter/terminal
p0840
p0844
p0845
p0852
X21.3 (+24 V) and X21.4 (ground)
See also
Further references on the drive:
● SINAMICS S120 Commissioning Manual
● Manual Booksize power units
5.5.5

Interconnections (dialog)

Interconnections
Each drive unit contains a large number of interconnectable input and output variables as well
as internal control variables. The drive unit can be adapted to a wide range of requirements
using BICO technology (Binector Connector Technology).
152
Meaning
ON/OFF1
1. OFF2
2. OFF2
1. OFF3
2. OFF3
Enable operation
EP terminals enable (pulse enable)
Infeed enable
Ramp-function generator enable
Ramp-function generator start
Setpoint enable
Meaning
ON/OFF1
1. OFF2
2. OFF2
Enable operation
EP terminals enable (pulse enable)
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
CNC commissioning