How To Communicate With The Control Via Access Mymachine - Siemens SINUMERIK 828D Commissioning Manual

Scope of delivery and requirements
1.6 Communication with the control
7. Connect by double-clicking the "Double-click to update" icon. If the connection is made
successfully, the icon will be displayed with a green border:
Figure 1-5
If a connection is not established, check the settings under "Network connections" → "Local
Area Connection".
8. Confirm with "OK" and repeat Step 7.
1.6.3

How to communicate with the control via Access MyMachine

Connection options
The following options are available for "Access MyMachine" to establish a connection to the
control.
● Direct connection (peer-to-peer)
● Network connection
The current status of the connection is displayed at the bottom in the status bar of Access
MyMachine.
Meaning of the buttons:
26
Online connection
Connect
Disconnect
Remote control
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
CNC commissioning