Clamping System: Speed Limits - Siemens SINUMERIK 828D Commissioning Manual

Spindle function
8.4 Spindle diagnostics
Procedure
1. The "S1 Spindle Diagnostics" window is open.
The "S1 Clamping System" window is open without the "S-Monitor" software option.
2. Press the "Clamping system" softkey.
The "S1 Clamping System" window opens and displays the acquired data.
3. Press the "Statistics" softkey to read out the clamping times and perform a diagnosis of the
clamping system.
The "S1 Clamping System Statistics" window opens and displays the acquired data.
- OR -
Press the "Back" softkey to return to the data overview.
8.4.8

Clamping system: Speed limits

For safety reasons and to protect the spindle, only maximum speeds are permitted for certain
clamping states. The drive limits the spindle speed in the respective clamping state to the
entered speed.
Clamping state
Released
Clamping
Releasing from state
"Clamped with tool"
Releasing from state
"Clamped without tool"
Clamped with tool
Clamping without tool
Clamped without tool
You can adapt the preset speed limits to your requirements by pressing the "Change" softkey.
NOTICE
Damage to the spindle through too high a speed
Changes to the preset speed limits can result in safety-relevant changes of the operating
states and to damage on the spindle.
216
Meaning
The tool clamping system is in contact with the release plunger.
Please note: The release plunger presses with the release force
on the clamping system.
The tool clamping system is in the transition state from "Re‐
leased" to "Clamped with tool".
The tool clamping system is in the transition state from "Clamped
with tool" to "Released".
The tool clamping system is in the transition state from "Clamped
without tool" to "Released".
The tool clamping system is in the "Clamped with tool" state.
The tool clamping system is in the transition state from "Clamped
with tool" to "Clamped without tool".
The tool clamping system is in the "Clamped without tool" state.
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
SINUMERIK Operate